-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
利用Github Actions在线编译失败
Q：是否搜索了issue (使用 "x" 选择)
* [x] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A：
本地编译成功，同样的`.config`文件利用github actions编译无法通过
Telegraf version 1.13.0
### Steps to reproduce:
1. run `telegraf --help` or `telegraf --version`
…
-
The command to change a sensor threshold (e.g. of -12 V supply voltage) would be:
ipmitool -H sensor thresh "Supply -12V" lcr -13.2
This command is not accepted as the new threshold value -13.2 is …
-
**Issue by [anoo1](https://github.com/anoo1)**
_Monday May 16, 2016 at 20:59 GMT_
_Originally opened as https://github.com/openbmc/openbmc/issues/273_
----
Implement user roles (via whitelist first…
-
Binding to the OCC when the host sends the set sensor command for the OCC can take a fairly lengthy period of time for OpenBMC. After some discussion, it was decided it would be best to have openpowe…
-
## IPMI plugin install steps:
```
> bash sudo apt-get install libipmimonitoring-dev
> ipmimonitoring
The program 'ipmimonitoring' is currently not installed. You can install it by typing:
sudo…
-
Problem statement:
Install a habanero system with OpenPower Firmware, and do a golden side pnor boot. After further reboots system still booting always from golden side pnor firmware, and it is not bo…
-
Hi.
Recently, I found this exporter for monitoring H/W status via freeipmi commands.
However, this exporter is based on running by system administrator because of executing freeipmi commands.
- Due…
-
Using the following YAML file to create a baremetalhost:
```
---
apiVersion: v1
kind: Secret
metadata:
name: bm-secret103
type: Opaque
data:
username: YWRtaW4=
password: YWRtaW4=
-…
-
SW422777