-
This is following of [the discussion on openhab community](https://community.openhab.org/t/onvif-camera-sends-motion-detection-to-phone-but-not-openhab-trigger/120611).
@Skinah here is the wireshar…
-
Yi 1080p Home
I enable the two options from the config tab, ip is found by the dvr or pc with onvif protocol but it does not transmit anything what am I wrong?
I also entered a username and passwo…
-
### The problem
Hi after the last update 2023.4, the binary sensors that are part of the ONVIF integration of my IP cams (Bosch) are no longer available (digital input, really triggered, motion det…
-
/etc/xl2tpd # /tmp/xl2tpd_2 -v
xl2tpd version: xl2tpd-1.3.1
/etc/xl2tpd #
[global l2tp]
debug avp = yes
debug state = yes
debug network = yes
debug tunnel = yes
[lac l2tp]^M
lns = 206.4.1.11:1…
-
### The problem
Trouble getting Reolink Door Bell (wifi) working via Integration. UI returns "Failed to set up".
Things I've tried/confirmed:
- running (current) latest HA and Reolink firmware…
-
- Streaming covers several protocols: RTSP, HLS, DASH, WebRTC, RTMP, etc...
- Streaming support (probably based on HLS/DASH) will also be included in Matter
- These do not cover all the same use cas…
-
**Description**
Configure SRS4 to pull RTSP stream (ingest RTSP) into SRS. SRS fails to distribute the stream via WebRTC, and WebRTC is unable to play the stream (it can be played using the RTMP proto…
-
ipython
```
import PyNvCodec as nvc
nvDec = nvc.PyNvDecoder('rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mov', 0)
Decoding on GPU 0
[-----] Media format: RTSP input (rtsp)
Tr…
-
Hey there, and thank you for this great integration.
Mainly a question, secondly, if possible, a feature request.
I was wondering what's going on with sound. I have seen several posts in the commu…
-
### Feedback
Since HA upgrade Onvif cameras not working with status failed to setup.
Until HA version 2023.4 Onvif was functioning properly.
### URL
https://www.home-assistant.io/integrations/onvi…