-
Hello there!
I know, that the MKS Rumba32 board is not sold by your company, but maybe you can help me to solve my connection problem. I'm using Klipper as the firmware, where a Raspberry Pi is used…
-
Hi,
I'm using your library with a BeagleBone Black and I encounter an issue.
When I communicate with the attiny85, at a certain moment on the i2c communication, the SCL pin it held LOW by the so…
-
Hi,
I'm using a Raspberry Pi 400 with default Raspberry Pi OS provided in the kit's MicroSD card. I upgraded the system today.
The system freezes after ~1s after starting `gcompris` an educative s…
-
What would be an alternative to running this on an RPi?
-
I've upgraded to this kernel hoping to fix my m2 ssd disconnecting randomly introduced in latest stable kernel released few days ago. That is fixed but with this kernel i can't overclock over 2000mhz …
myzar updated
4 years ago
-
Sorry to interrupt you. This has been troubling for a few days.
servo(sg90) need 50hz(20ms) time base pulse.
0.5ms-------------0°
1.0ms------------45°
1.5ms------------90°
2.0ms-----------135°
…
-
So, I've been working on this camera project again, and I am glad that the i2c-rtc was re-implemented for DS3231, but now I need pin 6 on the raspberry pi for boot up of the device when it has been to…
-
**Describe the bug**
A raspberry pi Zero in HID gadget mode cannot wake host computer.
**To reproduce**
Enable `dwc2` driver and reboot:
```sh
echo "dtoverlay=dwc2" | sudo tee -a /boot/confi…
-
**Describe the bug**
With either `dtoverlay=disable-bt` or `dtoverlay=miniuart-bt` set in `usercfg.txt` (or `config.txt`) the bootloader does not initiate. After powering on the Pi, it is stuck a…
-
I use the Raspberry PI to connect to a vintage CRT television from 1955 (Yes !)
At this time the French standard was 819 lines which was replaced by 625 lines later on.
I have modified my vintage …
f4hga updated
3 years ago