-
Hello Tom
1) I have a 'working application' which uses TMC5160_Arduino successfully with 3 motors.
The hardware used is DFROBOT FreeBeetle Board32 (V4.0) along with 3 Trinamic TMC5160 BOB.
Softwar…
-
I just got my new xPro v5 and have been connecting the motors. Other than giving it wifi info, setting the spindle type to PWM and setting $Spindle/Enable/Invert=On, this is stock right out of the box…
-
Hello @KevinOConnor
i have a problem with my printer. this error is the first time i've encountered. i hope you can see what caused it.
[klippy.zip](https://github.com/KevinOConnor/klipper/f…
-
I was trying to use the `SKR E3 DIP` with TMC5160 drivers.
I copied the `generic-bigtreetech-skr-mini-e3.cfg` and changed the PINs according to the [sheet](https://cdn.shopify.com/s/files/1/1619/47…
-
After latest update from GH my TMC5160 extruder began to fail during the print - mostly on the first layer after some successful extruding.
Also I've noticed sometimes the extruder not working right …
-
hello, i have the tmc5160.
but then printing and the drives report an erroe the printer don't stop? it shuld not be defficult to check the spi every second to see if a driver reports an error. and th…
-
Hi together,
I want to use Klipper on an Adafruit Grand Central M4 Express featuring the SAMD51 together with RADDS v1.6 and TMC5160.
When I try to home with the G28 command I get the error: Inter…
-
Since the 5th of march release I'm experiencing some problems with my printer. Initially, the printer couldn't even complete the homing procedure, but after the weekend I've updated Klipper to the lat…
-
Feature request, Processor Model, Stepper driver, and/or example config request, I am not sure.
I am not sure where best to ask for help. Brand new to Klipper, so please be gentile.
Supporti…
-
What is pin number for the diag1 pin on an SKR mini E3 Dip to use sensorless homing. I cant find it on any schematics. I am using TMC2130 for X0/X1 and TMC5160 for Y on one board and Z0/Z1 E0/E1 on …