-
Hi, i tested flashing BF 3.1 RC5 and RC7 onto a SPRACINGF3 board. When i arm, it will spin motors at minthrottle but not react to any input. In blackbox i can see the arming beep and my stick movement…
-
When driving a lissajous-trajectory, the baseFrequency and its dividers can easily be stored in /acquisition/drivefield, as only one frequency per channel is driven.
When driving e.g. a radial or s…
-
In the EU version as a test I've centered Radio_1 on 869.5MHz in the gateway. This produces frequencies of 869.1/3/5/7/9. All of these frequencies lie within an allowed ETSI band.
When I receive th…
-
Right now there is a lower limit of `SM` stepper move duration, 16 ms, below which there may be a brief delay introduced between subsequent movements. This is partially due to the time required for co…
oskay updated
7 years ago
-
I suggest changing the text (at https://github.com/NicoHood/MSGEQ7)
from
"The MSGEQ7 is an IC designed to analyze music on different frequencies. This library reads the MSGEQ7 with 7 different f…
gptix updated
7 years ago
-
Hi Nico,
thanks for the great lib. Works well, besides one issue.
I read the MSGEQ values in a for loop. And when the programm starts and music is playing everything is fine. But after I stop the mus…
-
Hi there,
Do you have a plan to let user to change frequency of PWM output in addition to duty cycle? Currently it's fixed at 100. I'm controlling a 4-pin fan and its PWM requires frequency ranging…
namgk updated
7 years ago
-
Thought that 500kHz for SPI was a bit slow.
tCLK specifies min 1us > 1 Mhz which is imho still slow.
Tested with 3.3V interface. ( teensy 3.2 )
Tested SPI upto 8Mhz, which works just fine. ( us…
djamu updated
7 years ago
-
Hi Kirill,
Thank you very much for your contribution here.
Now I have a sample generator in PL, and it is continuously pumping data at some slow rate (25KHz), and I would like to push such data…
-
The current smartnet parsing code is incorrect for rebanded systems -- the channel spacing needs to be changed from 25KHz to 12.5KHz in those cases.
It would be awesome if there was a way to config…