-
I'm testing out Actix, with a very simple setup.
The following works well in debug and release mode in the stable compiler 1.24.1
Works in debug mode but fails with a segmentation fault right away …
-
In order to get the correct color when calling `setPixelColor()`, I had to change the initialization to:
`Adafruit_DotStar leds = Adafruit_DotStar(TOTAL_LED, PIN_LED_DATA, PIN_LED_CLOCK, DOTSTAR_BGR)…
-
Given the switch from neopixel to dotstar strips there needs to be a new LED driver for driving the dotstars over SPI. Both SPI ports will be used one for each strip and strip size is not yet determin…
-
Hello
First off, thank you very much for the libraries. Even thou I am having an issue with the mirror scrolling, I can tell these libraries are exactly what I need using the FastLED framework.
…
-
Optionally add a level shifter according to the [Adafruit Dotstar Painter](https://learn.adafruit.com/dotstar-pi-painter?view=all) to the shield.
Connect the **!OE** pins to **!CE1** instead to GND.
…
-
On a new install from 2017-09-07-raspbian-stretch.img on a Pi 2b v1.1.
I've installed libsdl2 using apt-get, but other than that it's a pretty fresh install. Looks like including bcm_host.h was just…
-
Please add more content to the readme. Took me a while to figure out that the set() method doesn't push an update to the LED's. I think the chances are good that many people who want to use this won't…
-
(Edit: Note that the following analysis is basically all wrong; just to let anybody reading this understand that the issue was a jump-start to an improved driver, but nobody should actually attempt …
-
Hi,
Will you share the following files with me?
mail : [redacted]
import board
import digitalio
import time
import gc
import busio
-
_From @bockha on September 26, 2017 15:45_
Modify the _dotstar.so_ to use spi0.1 with chip select according to IUNO-TDM/MotorShield#3.
_Copied from original issue: IUNO-TDM/MotorShield#11_