-
Moving this from #425 so it's not lost.
> For the Z180 CPU it would be useful to have two additional named sections, beingCOMMON_AREA_0 and COMMON_AREA_1.
>
> The actual names of these two secti…
-
### Issue description
With software endstops on, when I try to move axis from lcd, they move only up to zero position.
The same settings works fine with 4.3.8 (in this case I used the online configu…
eavoc updated
5 years ago
-
I noticed that the following files are not present in `/opt/fcc/include`, which stops the build.
`stdint.h` `stddef.h` and `stdarg.h`.
I copied those files present in `~/FUZIX/Library/include/8080…
-
In the Z180 overlay the INO and OUTO commands are available, but they should be named IN0 and OUT0.
This can be changed in the files "crz80.py" and "crz180.py". Look for occurences of OUTO and INO…
-
Hello feilipu,
It would be very helpful if you could generate a pdf or png file of the assembly drawing from the PCB design tool you use for your PCB v2.2. If this is not clear, I am speaking of a …
-
The list of changes is getting very lengthy. A lot has happened in sccz80 especially. I think we should consider doing a 1.99C release to keep the list manageable even though we are far from Decembe…
-
The file [DDIR.C](https://github.com/z88dk/z88dk/blob/master/examples/osca/ddir.c) used in the CP/M example doesn't work:
It is printing the first directory entry and keep this printing in an infinit…
nbrok updated
5 years ago
-
```
.CR Z180
.EF macrotest.err
.LF macrotest.lst
head .MA name
.AS "]1"
.EM
>head "Marten"
>head "Marten\"Feldtmann"
.EN
```
-
Quic模式穩定性超過末版GP, 幾乎不再有連接無端失效, 需要重刷的情形...
從66到180, 白少辛苦喇, 看茶~~~
IP方面, 已然有掉落的問題, 但是可以自動恢復增長.
如果把設置項基本比齊社長舊版, 這種現象完全不影響使用.
看來是白少更注重效率, 社長偏於保守, 電信用戶可能更合適社長的設置值.
-
I may do this at some point but this could be a project taken on by anyone interested.
There were some surprising results in the benchmarks related to this.
Hitech C v309 for CP/M (a native z80 co…