-
### Describe the problem
Hi,
just installed a JK bms and connect it through bluetooth to my cerbo gx.
Unfortunately i have a problem with the battery temp, the cerbo shows a temp of 100 degrees, w…
-
### Describe the bug
Using a cronjob to restart at 0 and 12 the entire Bluetooth stack is really disruptive. Can we remove that restart line?
Otherwise it will interrupt the BMS communication for …
-
Hello,
i have two JKBMS conectet to serial 0 an 1.
As long as serial 0 is set to "JK BMS", BSC does not send/update mqtt topics "Cycle" and "BalanceCapacity" for serial 1.
By selecting "nicht beleg…
-
Handle multiple battery modules
-
### Describe the problem
Hello, I currently have four USB RS485 adapters. They each connect a Seplos battery.
The problem is that the CERBO GX crashes and restarts after an indefinite period of ti…
-
Hi all,
I am unfortunately not that capable to read this error messages and I am not a linux expert.
I have a JK BMS (JK_B1A20S15P) and the following bluetooth:
:**
Deye SUN-50K-SG01HP3-EU
**Software (please complete the following information):**
- Logger firmware version: LSW3_15_FFFF_1.0.96
Ques…
-
Read charge/discharge limits from the BMS settings instead of using a hard coded value.
This command is not in the LTT protocol document, but the app does set these so it should be possible to read.
…
-
### Describe the problem
Hi,
I try to connect my jkbms via bluetooth to my Multiplus 2-GX because the cable connection sometimes "lost" my jkbms.
The installation log showed me some errors. A…
-
the new jk bms, does not connect with several errors, jk02_32s protocol