-
First of I found this issue https://github.com/kuba2k2/libretiny/issues/113 but that seems to be resolved or at least closed so not sure if this is a new issue or the same.
Regarding versions and s…
-
### TFT Version
4.6.2
### ESPHome Version
4.3.1
### Blueprint Version
4.3.1
### Panel Model
EU
### What is the bug?
Ich habe gestern das Update 4.3.1 bei EspHome und bei NSPanel_HA_Blueprint …
-
I am trying to compile for a fan controller. Unfortunately, the compile is failing
```
$ cat home-fan.yaml
substitutions:
device_name: homemate-fan
friendly_name: Bedroom Fan
esphome:
…
-
I've managed to flash multiple devices which took quite some time to figure the correct configuration out.
What would be the best place to share our success stories for each other?
I´d uploaded a p…
-
I was able to flash using cloudcutter but it seems it does not connect to the wifi.
When i press the scan wifi - i get a lot of SSID (there are only 3 in the area) with strange character into the nam…
-
When compiling e.g. on Debian Buster, you might get the following error:
```
Building in release mode
Compiling .pio/build/generic-rtl8710bn-2mb-788k/src/main.cpp.o
sh: 1: arm-none-eabi-g++: not…
-
I have a Deta 6000HA inline switch (manufactured by Arlec) that uses a WB2S module. I have been able to dump the flash from the module, but when running `build_profile` I can't get a token - it stalls…
-
Hi!
I had an old Baleon chip (BL2028N) which is compatible with Beken. However, when i try to flash firmware, it shows me this error:
```
bk7231tools write_flash -b 1500000 -d /dev/ttyUSB0 -s 0…
-
I use device groups to sync my wall touch switches with light channels. The device groups work wonderfully most of the time. The only problem is when I try to switch OFF using a different device to th…
-
I've made several attempts on this device. It got an "A-" AP, so I guess that means it has been "cut"? This is a TreatLife SL-10 RGB bulb, which Tuya app showed as version 1.3.21 (checked before I sta…