-
| Name | Display | IRsend | GPIO | shake sensor |
| --- | --- | --- | --- | --- |
| ST Nucleo F767ZI / H723ZG | :heavy_check_mark: (ssd1306 and ILI9341) | :question: | :heavy_check_mark: |
| Feathe…
-
ST7789 initialization seems out of date.
In LVGL @ master, LVGL v7 and LVGL v8 the same issue is present, where static noise is displayed to the screen during initialization in st7789.c
I've tri…
-
### Port, board and/or hardware
esp32
### MicroPython version
MicroPython v1.20.0-729-g82bf0aa19-dirty on 2024-08-17; M5Coreink with ESP32-PICO-D4
### Reproduction
while execute lv display driver…
-
Hello! In my current project, I use ESP32 and display with ILI9341. I would like to use your library, but - as a beginner - I have a lot of trouble with that. Is there somewhere documentation that des…
-
I'm trying to make a Lvgl for MicroPython using your software. Using a precompiled Micropython for my Esp32_generic_s2 works, but when building the firmware with lvgl with your I get a non working RPE…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Thanks for your effort.
I found you creat a python script (make.py) to auto build micropython firmware with lvgl as a submodule.
make.py let it is convenient to build firmware, but it also let it …
-
Hi, it would be great if you could try it with a DVI PMOD too,
I made a 16-bit version (RGB-565) of the icebreaker-pmod that should be possible to handsolder.
https://github.com/jbilander/icebreaker…
-
### The problem
The device is stuck in a boot loop without loading the app or an apparent error.
[logs_office-door-display_run(1).txt](https://github.com/user-attachments/files/16697748/logs_offic…
-
Hello,
I see pin 36 in the last answer, but no such pin is available on the esp32 board.
Can you say, what numbers are those? Numbers on the PCB board on the ESP32 DEV board? Or may be something …