-
```
The following features still need to be implemented:
1. ls baud - list, with baud rate change
2. set param index value - set a parameter (position, speed, tuning)
3. get param index - get a param…
-
Bonus points if it runs _in_ servo, but debugging a servo tab is sufficient.
-
```
The following features still need to be implemented:
1. ls baud - list, with baud rate change
2. set param index value - set a parameter (position, speed, tuning)
3. get param index - get a param…
-
```
The following features still need to be implemented:
1. ls baud - list, with baud rate change
2. set param index value - set a parameter (position, speed, tuning)
3. get param index - get a param…
-
Two identical motors are used to steer and apply the brake on the 1/3 scale car. There is an arduino that needs to be programmed with the logic to turn the motors to achieve these goals. Basic motor…
-
Could also be considered a feature request?
TL;DR: Control packets are sent during start up that inconsistently make servos and cause unwanted behaviour in builds, but cannot be influenced by the c…
-
Running `servo` on `master` (`bbbdb77a7a`) on NixOS and i3 crashes with a bizarre assertion failure:
```
assertion failed: `(left != right)` `--dev`.
left: `0`,
right: `0` (thread main, at /hom…
-
https://revealjs.com/ is used for servo presentations (but with some tweaks): https://servo.org/slides/template/
There's a discussion to support it in Zulip: https://servo.zulipchat.com/#narrow/str…
-
Firefox used to work, but it does not anymore due to various hard coded options passed to WPT runner.
Here are some WIP patch: https://github.com/sagudev/servo/commit/a8ca64cedb0dd8fb7c6c59ea7b77e…
-
### Is there an existing issue for this feature request?
- [X] I have searched the existing issues
### Is your feature request related to a problem?
When you have an existing model and smth changes…