-
Hi notro:
I use kernel 4.4 to compile driver module,I see the module already made.: fb_st7789.ko and other module.so I copy it to pi and depmod. when i use command: modprobe admatec_c-berry28…
-
I have a display and need to use 9-bit data. How do I set it up? Thank you!
-
- [x] 1. switch on/off SD card circuitry
- [x] 2. set SD card pins (DAT3:0, CLK, CMD) to log 0 or high Z when SD card is switched off
- [x] 3. switch on/off CTP (capacitive touch) circuitry
- [ ] 4…
-
Followed instructions and configured menuconfig, compiled and make flash, make flashfs for wrover kit V3. Display light but no image displayed. Then it hanges.
V (4792) tcpip_adapter: check: loc…
-
The TFT display driver using the [example](https://github.com/loboris/MicroPython_ESP32_psRAM_LoBo/wiki/display#example) settings in the Wiki documentation listed for the 'ESP32-WROVER-KIT v3' do not …
-
Hi,
I have bought this board https://github.com/LilyGO/TTGO-TS-V1.2,only VS1.4.
When I flash Karadio32 I get this :
rst:0x3 (SW_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xe…
-
Hi all,
I am following the steps described in https://libvirt.org/kbase/launch_security_sev.html to enable SEV in the kernel of my AMD Ryzen 5 PRO 2400G (with Ubuntu 18.10). However, for some reas…
-
I tried to build rpi-basic-image and core-image-base ( rpi-basic-image.bb suggest to build core-image-base because rpi-basic-image is deprecated) for raspberry pi zero wifi. I am able to build and boo…
-
Because I work at the kernel 3.4. So I use the old version of fbtft.
commit number is 06f0bba152c036455ae76d26e612ff0e70a83a82.
But i find that when I use Qt to display a picture ,the picture is very …
-
I am replying to https://github.com/raspberrypi/linux/pull/1270#issuecomment-176120539 here.
I maintain Linux drivers for a number of LEGO MINDSTORMS compatible products that use the displays listed …
dlech updated
6 years ago