-
Hi @slipx06
Using the latest avaliable version of your card still notice some issues
The value can't be negative and can't exceed 100%
Can you please check?
some information:
https://www.npro…
-
Hi,
I am sorry if that maybe out the scope of this repo, I wanted to ask if you could give me a link to where I can find a document with the list of Modbus Registers for the Sunsynk Inverters.
-
Hi,
Any chance we could get an updated card which includes 3 x MPPT's?
Then can we use the Aux for power coming in from a Micro Inverter?
Thanks
Spencer
-
Hi,
Absolutely wonderful job with this great power flow card, loving everthing about and promoted it in the Sunsynk FB forum.
Having Dual Inverters in parallel, I've created a multitude of templat…
-
Hi
What do we need between the esp32 tx rx ports and the sunsynk rs485 port ?
Would that be a 3.3v rs232 to rs485 adapter ?
Possible to please elaborate and do you have a link of the hardware ?
R…
-
I have one string of Solar panels and moving dots are going OUT of the middlebox section toward the Panels and towards Inverter.
Please see below:
-
Looking at purchasing one of these, https://www.robotics.org.za/W16529?search=wave%20rs4 as mentioned here, https://github.com/kellerza/sunsynk/issues/60#issuecomment-1396526228. Would this be the be…
-
Hi there,
Great card, its beautiful! I attempted to configure it against my setup Deye 8 KW through Solar Assistant and the config was greatly different. Don't think I have everything configured co…
-
Before 16h we were on stage 1. After 16h we are on stage 3. We have a load shedding slot from 14h-16h30.
Before 16h the card showed the slot correctly/completely.
After 16h the card shows the slot…
-
My Sunsynk addon x 2 have been working wonderfully since installed and set, thanks to Johann. An interesting Blueprint PV solar excess optimizer - auto control, has recently been released which requr…