-
Since few days (without changes made to soft- and hardware), some time into the print, the steppers just stop moving. I see the printer accepting commands (in the Octoprint "Terminal" tab) and rep…
-
mcu=103c8
As per the instructions found here: https://github.com/grblHAL/core/wiki/Compiling-GrblHAL
I added OVERRIDE_MY_MACHINE, BOARD_CNC3040, N_AXIS and USB_ENABLE around my configuration as a la…
-
I'm experimenting with the TMC driver registers. In my printer I have TMC5160 drivers.
According to the Excel spreadsheet https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC5160_Calc…
-
Hey,
So I was running the TMC5160 over SPI on a SKR v1.3 for quite some time without any issue.
Due to a heatbed upgrade I moved to a 24v PSU and problems started.
Using the exact same klipper…
-
Hi All
I need some help, please. After wasting a few hours debugging this I'm still scratching my head.
I've added a second z stepper to my cartesian printer, on an skr v1.3 using tm…
-
klippy lately changed log file location form /tmp/klippy.log to /var/log/klippy.log.
However Python fails to make an log rotate if the log files gets too big - guess this might happen also during…
-
I'm having an issue that is driving me completely crazy:
On some prints I'm experiencing layer-shifts. They are:
- Around .1 mm
- Concentrated on mainly the Y-axis
- Correcting themselves after…
-
My config: SKR Pro Board from Bigtreetech with TMC5160 V1.2 from Bigtreetech. Raspberry Pi 4 B running Duet Web Control
I want to use a manual stepper for cutting filament, so I defined it as:
[…
ghost updated
2 years ago
-
I am using klipper on a pen plotter with an airbrush mounted on a wall. It is working fine and I'm getting used to the system and its parameters, but one thing that I haven't been able to solve is…
-
Hi, i would like to try running FluidNC as firmware on the xPro V5.
to create a config file i would need to have a schematic of the gpio pins used.
alternatively could you provide a sample config ya…