-
Hello,
First off, I wanted to mention that I have tested the [Enker Wifi USB Stick](https://www.amazon.com/gp/product/B06XC6T7KB/ref=oh_aui_detailpage_o05_s02?ie=UTF8&psc=1) with the RT5370 chipse…
-
Even though I have set SHOW_BITRATE=N in wifibroadcast-1.txt I'm seeing the display of the bitrate in the top right line of the rx screen.
I cannot even see, that this setting is used anywhere in t…
-
@svpcom I note in installation instructions contained [here](https://dev.px4.io/en/qgc/video_streaming_wifi_broadcast.html), in "Software Setup" bullet (3) I have to "Patch your kernel". I am not a so…
-
with ETHERNET_HOTSPOT=N
connecting RX to the router via cable, on display appears " Ethernet connected. IP 192.168..."
Via SSH with "root" user and default password I can see the Boot folder but I c…
-
Hi Rodizio,
When I drank my first coffee this morning and browsed through the latest Pollin catalogue, my eyes suddenly got stuck looking at this product:
https://www.pollin.de/p/banana-pi-m2-zero…
-
Hi!
First of all, thanks for your great work on this project! It has really reached an impressive level of quality!
I am trying to get an IP cam that provides rtsp streams of H264 video to work …
-
How to change this part of TX to use uvc stream from EASYCAP usb dongle (mJPEG format, SD, needs to be transcoded to h264):
# nice -n -9 cat /dev/video0 | /root/wifibroadcast/tx_rawsock -p 0 -b …
-
i have been experimenting with a B101 HDMI encoder and a hdmi switcher but i have found that when the video feed is disturbed it wont start again short of rebooting the Tx pi, would it be possible to …
-
Hi,
I followed every step that is mentioned in the WifiBroadcast. I just changed the part that needs video on raspberry to record or send with a python code which generates for example only "1"s in…
-
I have been looking at making profiles for different settings, channels, hotspot data rate etc.
the problem is the number of profiles multiplies every time you add an option, so say i wanted 4 cha…