-
**Please Describe the problem to be solved**
I am having several networked SDRs like Adalm pluto and SDRplay TCP servers , that I would like to utilise remotely on a more powerful system than an rpi …
-
I have already installed the fpga bitstream to a pluto adalm v0.34, and compiled the srsenb, and set cpu scaling to performance. But when starting srsenb I get an error when trying to create the TX bu…
-
question:I run the Capture RF Data to Baseband File Using ADALM-PLUTO Radio example with matlab 2022b
configurePlutoRadio('AD9364') is error "Reference to a field that does not exist 'SerialNum' "
!…
-
... doesn't work at the moment. I don't know why.
use "ip:192.168.2.1" for now.
-
Hi. I have used usrp b210 with -s 2500000 -b 16 -x 0. As there were no problems. USRP was transmitting the signal, I have checked with a spectrum analyzer. But my mobile phone (S6 edge) cannot receive…
-
Hi - I was very pleased to see a Linux QO-100 application. I have used Sdrangel on linux to transmit and receive on QO-100 which worked - but in the end I ended up using SDRConsole on Windows as it su…
-
I am testing some code to detect when a Soapy-compatible SDR is physically unplugged and to remove it from an internal list. This works for an RTLSDR and HackRF, but the Pluto continues to be recogni…
-
I recognised that TX always enabled , on PS_MI00 are always 1,8v , probably FW fault or?
pls assist
Sergey
-
Current "Make gen-boot-load" fails. Probably there is a problem in the order of the commands. If I run them individually in pluto, after uploading the bitstream to /lib/firmware I get:
$ cd /lib/…
-
Hi, could you please assist with the following issue or provide hints what to try next?
### Problem
Cannot extend SDR range with [official instructions from AD]( https://wiki.analog.com/university…