-
Look at this resource - https://github.com/mkfrey/u8g2-hal-esp-idf
Check if the SCL and SDA pins for I2C work proper.
-
Since the api is c based I was wondering if i can use this library in the AI Thinker A9/A9G Development board. It has a build in TF Card Slot and its SDK is totally c based.
-
Seems only works with board type : AI-Thinker ESP-32-CAM
-
### The problem
Enabling esp32_camera causes a bootloop as follows:
```log
[01:46:07]E (10219) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
[01:…
-
On Mac, installed the latest IDF, but can't seem to connect to the ESP32 (I see the port as: /dev/cu.SLAB_USBtoUART). I get this error:
A fatal error occurred: Failed to connect to ESP32: Invalid hea…
iroth updated
3 years ago
-
Good day,
I'm writing you from Colombia and looks like a problem with the wiki page, 502 Bad Gateway Issue, and I need to download Ai-Thinker GSM Module Download Tool, and other stuff, please help.…
Rogil updated
2 years ago
-
In https://github.com/adafruit/circuitpython/pull/6831 we are going to check that every board has a distinct creatorid:creationid. While in the past for vid:pid we have allowed boards that differ in a…
-
Hello the command:
AT+MQTTCONN="www.myserver.com",1883,"12345",120,0,"Ai-thinker","123456"
works perfect if the port is 1883 but in my case I have the MQTTBox server running on different port, chang…
-
**Describe the bug**
Powersave might not be working on BL602
**Firmware:**
- Version [e.g. 1.17]
- Device: Any
- Chip/model: BL602
- Device config:
Power save command on BL602 end here in S…
-
**Describe the bug**
Currently, DHCP requests use the auto-generated hostname (which does not carry a semantic load and makes it difficult to find the device in the list)
instead of the short …