-
AIS Spare has the same semantics as NMEA 2000 Reserved. I don't think it makes sense to output one but not the other.
Removing AIS Spare from the output would avoid confusion among those who don't …
-
It may be desirable to alter the "Device Function" field of PGN 60928 (ISO Address Claim) to be a lookup, since the raw value is not very useful. However, the lookup depends not only on "Device Functi…
-
to log AOOS changes
-
It's a very simple matter to display the postion using a couple of Python lines.
It would be nice to have the position filled in automatic when submitting a position report. I have a simplified vers…
-
it is a foss ais transceiver and gps receiver, diy, convenient, open hardware and cheap. it is sold by openmarine and supported by openplotter.
-
@RooieDirk
Dirk..
Based on a request from a small tanker ship I supplied with OCPN I started to look for possibilities to add AIS static data in OCPN.
Now I found this plugin and realized it's no …
-
# IS1 Introduction
The INSPIRESat-1 is a to-be-launched nanosatellite from the International Space Program In Research and Education (INSPIRE) Educate to promote cultural exchanges through internati…
-
@leamas
Thanks for the "updates-templates README". Following that a lot ci are built.
There's a fail on macOS due to some, what I understand, "commercial" issue. They want me to buy a "Performance …
-
>setting>connections>Data input
In our setup we get two data input feeds:
NMEA0183 navigation data via a serial interface (into USB 2.0) at BAUD rate of 4.800
AIS input (EASY TRX Nav transcei…
-
Current CPU's seem to be going for more cores rather than increasing the speed of the cores. Raspberry Pi is an example of 4 cores that are not overly fast. Currently OCPN uses, or appears to use, a s…