-
There's a plan on ONVIF-T support for motion detection?
I read the issue https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/641 but it was closed tue to inactivity.
Only mqtt?
Thank you!
-
Instruction set: `RV64IMAFDCVU` (`RV64GCV`)
Official Website (chinese): https://d1.docs.aw-ol.com/
Linux branch: https://github.com/smaeul/linux/commits/riscv/d1-wip
U-Boot branch: https://github.c…
-
Online FW update no longer works.
busybox needs to be updated.
In the meantime, use the manual firmware update procedure:
https://github.com/roleoroleo/yi-hack-Allwinner/wiki/Manual-firmware-upgrad…
-
Hi,
i would like to connect my 7" PanelDue to one of CB1 UART's.
But i've no idea how to set UART1 TX and RX to be enabled on this Allwinner-Thing.
With a CM4 it works, there i know how to …
-
Using a sunxi board I find that the initial serial output does not appear with 'labgrid-client console' when sending U-Boot over USB.
I see this:
```
LG_CROSSBAR=ws://kea:20408/ws labgrid-client …
sjg20 updated
3 weeks ago
-
* Raspberry Pi model:
* Operating System used:
Dietpi
* Version of Python used:
2,7 and 3,5
* SD card memory size:
128 GB
* Size of USB/other device used as swap (if building from source):…
-
使用官方build报错:
```
drivers/net/ethernet/allwinner/sunxi-gmac.c:2193:13: error: ‘ucc_geth_suspend’ undeclared here (not in a function)
drivers/net/ethernet/allwinner/sunxi-gmac.c:2194:13: error: ‘uc…
-
```
[root@bananapi BPI-M3-bsp]# ./build.sh
==========================================
BPI-M3 BSP Build Tool
==========================================
This tool support followin…
-
wanted to test out new sunxi emac patch from DD branch
by choosing target: orange pi PC
im getting:
> CHK include/config/kernel.release
> CHK include/generated/uapi/linux/version.h
> CH…
-
Hello,
Is there any direction on how to add the USB HOST support for F1C100S? I have the Sunxi low level drivers working in bare metal (usbc_dev.c, usbc_dma.c, usbc_host.c, usbc_i.h, usbc_phy.c, usbc…