-
Radar altimeter should have OFF flag whenever power is off or no radar return (too high or bank angle too big for example). Currently there is empty flag window.
- DCS Version: DCS 2.8.5.40170 O…
-
-
### Aircraft Version
Development
### Description
For takeoff configuration everything in the aircraft that should reasonably be set is.... except the QNH/altimeter setting.
If it is possible, cou…
-
Currently the when a model is loaded the FrSky built in altimeter jumps to some value that is not the last registered when the model was unloaded or the radio turned off. The few receivers I have all…
-
Use the BPM180 sensor to estimate altitude and keep it stable.
-
![image](https://user-images.githubusercontent.com/48159367/84041398-c8979f80-a971-11ea-9618-c0f3816bf941.png)
MMU always drops the last digit from the altimeter setting, my transponder and GPS dis…
-
The altimeter could be re-done with a dual-window model which has both inches of mercury and also millibar in the same disc. For ease of calibrating the animations those discs could actually be separa…
-
#### Issue details
When using a laser altimeter and the "Terrain" option in mission planner, We have found that if the drone transits over water (pond) the drone will enter RTL.
This is due to the r…
-
Maybe add a switch to change the altimeter unit.
Could be on a short hold of the baro encoder.
I guess reading the current setting from the sim and using it for the indication on the deck would be …
-
The equations defined in the table in this section aren't really referenced anywhere. Also, these should probably all be defined at the beginning of the section for consistency