-
The ubinascii module is not present in the NUCLEO-G474RE so it is causing problems using ampy or rshell.
Thank you very much
-
Official firwmare from https://micropython.org/download/esp8266/
pip install mpy-cross-v6 : ver
pip install adafruit-ampy : ver 1.1.0
```
mpy-cross-v6.exe --version
MicroPython a327cfc on 20…
-
I have multiple USB hubs on my Windows PC and a fair number of USB devices. For some reason Python needs to see Windows port names with numbers above 10 in a non-obvious format or they will not be ope…
-
I'm using this board https://www.olimex.com/Products/IoT/MOD-WIFI-ESP8266-DEV/. When I try to run
"sudo ampy --port /dev/ttyUSB0 run test.py" or any other command, it says "Could not enter raw repl".…
-
This is actually an issue and a response I posted on the ampy project. See [ESP8266 Micropython "Could not enter raw repl" #19](https://github.com/adafruit/ampy/issues/19)
I am creating this issue …
-
This is a general question about how thonny works.
How does thonny saves a file on the target device.
I am currently using adafruit-ampy, but its too much hassle, wanted to know how thonny does the …
-
I've tried several prebuilt firmwares for my M5Stack
It's looks likes it flashes well as I see:
```esptool.py v2.3.1
Connecting....
Chip is ESP32D0WDQ6 (revision (unknown 0xa))
Features: WiFi, …
-
Thanks for this great tool! When trying to burn the firmware to an Adafruit Feather board, I was running into continuous problems. It turned out that some USB chips require a slower baud rate, like 11…
-
One of the most outstanding features of the Mu editor is that it performs some of the features of ampy through its 'Files' pane. It would be useful if this capability was expanded to include:
* na…
-
Run task should "Send current script to device…" but in Output I see it first deletes all files and then uploads them all. No matter if they changed or shoudl be ignored (by .micropythonrc file).
`…