-
These warnings pop up when building AVR-LibC device libraries:
```
In file included from ../../../../../source/avr-libc/include/avr/io.h:759,
from ../../../../../source/avr-libc/…
-
/usr/bin/avr-ld: cannot find crtatmega4809.o: No such file or directory
/usr/bin/avr-ld: cannot find -latmega4809: No such file or directory
These files should be in my case in /usr/avr/lib/avrxmeg…
avrf0 updated
7 months ago
-
Config and programmed via UPDI and bootloader does not respond on pin 20, 21 for Atmega4808, TQFP32.
![image](https://github.com/MCUdude/MegaCoreX/assets/10361323/eb616377-a719-4292-84d4-db47f8bdc2…
-
The current "avrdude.conf" has the following description in three places: ".xmega", ".avr8x", and ".avrdx".
```
memory "data"
# SRAM, only used to supply the offset
offset …
-
The terminal `part` command outputs information about the connected part. This command, however, was developed when there were only "classic" AVRs, but now we got "modern ones" (with UPDI) and Xmegas.…
-
Here is the exact message from Azure:
`This resource uses a certificate on the Baltimore CyberTrust Root which will expire in 2025 and must be migrated to the DigiCert Global G2 root. To avoid serv…
-
There are a couple of ..._write_byte() routines that contain code for writing the signature page, eg,
https://github.com/avrdudes/avrdude/blob/cbac6349b02ae72ec3ed2b345efe8f121d846547/src/jtagmkII.c#…
-
First of all thanks for these instructions. We have a lot of these AVR-IoT WG which suddenly became useless after Google IoT was shut off and were delighted to see the detailed instructions to convert…
-
I use the same (REAL) serial port programmer (not usbtoTTL, or USB2RS232) on com1 an RS232 port.
After avrdude6.3, none of the avrdude versions work with any serial port programmers I have tried.
U…
-
I'm quite unexperienced in the arduino world, however using the same tools and procedures, I didn't have any problem in burning a bootloader for an ATmega4808.
Using ATMELICE as a programmer and pl…