-
I normally do test plans and tests using Azure DevOps. I moved the code to GitHub as a courtesy to the Linux people but now we have to figure out how to manage testing.
Right at the moment I am sup…
-
### Describe the problem
I have a dual boot system with windows 10 and windows 11.
In windows 10 I have no problem, but in windows 11, the "Uploading" process:
![image](https://user-images.gith…
-
Hereafter the list of all new variants requested
## Note
**This is a community projects so any help are welcome.**
To add a STM32 based board follows this [wiki](https://github.com/stm32duino/A…
-
### Describe the problem
**Arduino Web Editor** has [a "Secret tab" feature](https://create.arduino.cc/projecthub/Arduino_Genuino/store-your-sensitive-data-safely-when-sharing-a-sketch-e7d0f0) that…
-
# Arduino
>https://www.arduino.cc/
>https://docs.arduino.cc/learn/
>[面向初学者的物联网 - 课程](https://microsoft.github.io/IoT-For-Beginners/#/?id=iot-for-beginners-a-curriculum)
>https://github.com/micro…
-
### Describe the request
Establish two sets of standard "extra flags" build properties:
- one set for use by platform developer
- one set for use by the user
These should be clearly document…
-
-
Hi,
Klipper is probably 3D printing's most advanced firmware.
It is a two part system where the hard math is done on a real computer, and the real time stuff is done on a microcontroller.
A s…
-
Hi Mr Pham Cong Duc,
I used Arduino Pro Mini in its 3.3v, 8MHz which connected the HopeRF RFM 92W (Low-cost LoRa Iot Device: A step-by-step tutorial). But when i removed the power led and the board …
-
I just installed the stack trace tool, and I am getting this error message. I have also searched for the tool chain...and found it can be installed from here:
gnutoolchains.com/esp8266/
but after t…