-
In the past 24 hours, I've had rtl_433 hang twice on one host and once on a different host. Unfortunately, I've yet to capture a core file -- SIGABORT isn't generating one. Will add more details whe…
rct updated
10 months ago
-
I followed the said steps and I flashed generated images in emmc flash using fastboot. Now able to run Android 6.0 in my BBB. Now, i am trying to install an OTA package hence pushed my OTA package .zi…
-
Hi!
I was about to start a new Node.js project that does exactly what `zetta` does, so I'd be glad to contribute here.
What do you think about modernizing the codebase? We could do that by small…
-
The file on my SD card only has 2.8 GB but the script will keep copy until the emmc is full and eventually the emmc will have some boot issue.
`sudo /opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh`…
-
I found this [page](https://circuitpython.org/blinka/beaglebone_black) and it seemed like I could install Blinka on a BBB. When I tried I got the below errors.
Running:
- Python 3.10.4
- pip 22.1…
-
Hi,
I am trying to boot from microSD on beaglebone black.
- microSD partition 1 fat16, u-boot.img & boot.scr & MLO & u-boot-spl.bin
- microSD partition 2 ext3, rootfile system
- TFTP server (uBunt…
-
Recently is our internal CI we have been observing increased number of issues where spinel interface times out. However the last reset reason on Nordic SoC shows Power On (without any potential assert…
-
I have observed the issue described in https://bugs.openwrt.org/index.php?do=details&task_id=4237.
## basic steps
1. download image https://downloads.openwrt.org/releases/21.02.1/targets/omap/gene…
ghost updated
2 years ago
-
When booting from TF card, press the BOOT button and then press the RST button, will boot from TF card again. -- this is OK
After booting from EMMC, pressing the RST button, BBAI is stuck and will n…
-
*syabyr:*
device:beagle bone black
kernel boot failed:
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.154 (builder@buildhost) (gcc versi…