-
Hello,
Using chirpstack, I am unable to get acknowledgement for confirmed downlink requests for Class-C devices. Is this not supported or am I doing something wrong?
Thanks,
Edit: It seems co…
-
I've been working with a RAKwireless RAK4260-Dev board and was not getting the RSSI values at my gateway that I was expecting to see. Finally tried adding this to my sketch:
lora.setTxPower(14,RFO_P…
-
Hi
I got an new issue (I also have minor issues but I will talk about these in another thread)
The lorawan library didn't work when ESP wakes up after a light sleep (`esp_light_sleep_start()`)
In…
-
Hello!
I'm using yours OTAA examples on RAK4260 (SAMR34J18 + SX1276) /w BastWAN bootloader - EU868 Band.
Everything works ok until I stay in Class A. (both Uplink+Downlink+ACK... etc.)
When I swi…
-
Hi friends,
How does the project control regional duty cycle?
I have tested class A uplinking for interval 5 sec. But after a few uplinks, i have got mic error on the server
In other tests, i have…
-
Hi,
I am currently working on Dragino LoRa Shield with TTI v3 in Class C in which we need to implement a simple uplink & downlink in our existing project in Indian frequency band (IN865).
Since…
-
I am trying to receive an uplink confirmation by setting the confirm flag while running sendUplink. My network server (Chirpstack) acknowledges that it is a confirmed uplink). How do I check in my dev…
-
Hi,
I am currently working on samR34 xplained pro LoRa shield . I need to be work in IN865 with OTAA Class A.
I have seen that you have worked on few Bands. Is it possible to have IN865 BAND updat…
-
Hello there!
I'm also trying to resolve this issue on [the TTN forum](https://www.thethingsnetwork.org/forum/t/sam-r34-lorawan/42447) but here I'm just looking at the BastWAN core aspect.
I rece…
-
Hi, thanks for your contribution,
Can you tell what encoding are you using? i get unreadable chars on chirpstack! i want to add a chirpstack repo when I finalize this.
If you are around in Copenhag…