-
Hello - I'm testing the TMC2209 BIGTREETECH v 1.3 drivers without UART config and no matter which microstepping option I set via MS1/MS2 pins or what potentiometer value I set (tested max clockwise / …
-
Hi
Has anyone an idea how to get work the E3 turbo with Ender 3v2 dwin display?
EDIT:
yes the e3 turbo is working with Ender 3 v2 stock display.
But a special display cable is required.
Att…
-
I was adding ESP3D to my printer and I had problems to understand that ESP01 was not found, but running.
The problem was default config.ini file, with wifi port disable.
Anyway... config.ini in th…
-
I have attempted to install a MicroProbe V2 on my Octopus Pro V0 board running Marlin Bugfix 2.1.X, but I can't get it to work. I'm sharing a video of the issue to see if anyone can tell me why this i…
-
Has anyone gotten the 5m to work with an eddy sensor?
https://github.com/bigtreetech/Eddy/
It's integrated into klipper mainline, but I know we are running a few revs behind. https://github.com/Kl…
-
I would like the option to change the Panda graphic to something custom or at least be able to change to the bigtreetech logo.. Its nice but is a little too cartoonish for my taste.. thank you..
-
The Z stepper DIR pin is PB7 not PC7
https://github.com/bigtreetech/BIGTREETECH-GTR-V1.0/blob/master/BTT%20GTR%20V1.0/manual/GTR%20V1.0%20PIn.PDF
Can be verified - the Marlin PINS file has the c…
-
Hello
I wanted to install the Bigtreetech Filament Rolout Sensor, I changed and compiled the firmware according to the instructions. I have replaced the sensor with the original, I can also call up t…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
2.1
### Operating System (OS)
Windows
### OS Version
windows 11
### Additional…
-
K-Touch is only showing a blank black screen whenever it powers on.