-
Please consider adding WoM feature, witch can significantly improve power consumption of ESP32. I think according to Schematics INT1 and INT2 pins of QMI8658 are connected to GPIO10 and GPIO13 of ESP3…
-
Hi, I'm working on a complex project where I need to work with classes. So I tried the SimpleButtonBlink example, but since resetContext() does not exist anymore I replaced it with reset(), changed pi…
-
Hi Bert,
thanks for the great work with Vitowifi and TreeLight. I've been trying for a few day now to get TreeLight to work, but I don't seem to be able to receive any MQTT messages, not even with th…
-
blinker light's fender find different blinker lights. These doesn't realy match.
-
I'm following the [Led blinker example](https://github.com/fprime-community/fprime-arduino-led-blinker/blob/main/docs/arduino-cli-install.md#arduino-cli-installation-guide). When I use the command `fp…
-
```bash
(venv) ➜ [/home/pi/Soft/blinker-py] git:(dev_3.0) ✗ sudo python3 example/voice_assistant.py
Press Ctrl+C to exit
2022-04-11 21:13:27.355 | SUCCESS | blinker.device:device_init:223 - Devic…
-
For running server
pip install blinker --upgrade
run this and then pip list | grep blinker
if it says 1.4
then you should be good to go
-
I couldn't get the blinker.go example to work when I did
> go run blinker.go
But when I build the file it works fine.
> ./blinker
Is there a way to just run the file to speed up the prot…
-
Hi @oliveiraallex .
I look at booklet. Very impressive work. Congrats!
But I found some places which I assumed to be done differently according to my initial design ideas. So two things.
1) Ins…
-
**Minecraft Version(s)**
all
**What is the suggestion**
in options->skin customization there is a way to swap the main hand.
Inertia should use packets to constantly toggle this, similar to the s…