-
I made bitaxeUltra 204 on PCWAY. The chip used is BM1366AL. I used esptool to flash esp-miner-factory-204-v2.0.7.bin, but it didn't work and it showed that it could only accept new jobs. How should I…
-
Hello,
I have my Bitaxe made by PcbWay. But it seems not to be working:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x15 (USB_UART_CHIP_RESET),boot:0x28 (SPI_FAST_FLASH_BOOT)
Saved PC:0x40…
-
Hi, after updating via the web interface from 2.0.4 to 2.0.5 I have a lower hashrate. I didn't change anything in the settings 575/1200. Model: | BM1366
Thanks
-
the BM1366 wants 1.2V core voltage. for 3 in series this should be 3.6V.
the easy way to do this is change R10 from 1.54k -> 2k in the TPS40305 feedback circuit
skot updated
9 months ago
-
Hi, suddenly the Bitaxe always returning Nonce Difficulty 0.00, I have replaced a new BM1366AL chip, but still facing the same issue, RX Job ID is always 40, and nonce difficulty is always 0.00.... An…
-
Hi,
I'm a bit confused about how the caps C4 and C16 are connected to the BM1366.
![image](https://github.com/skot/bitaxe/assets/3079832/62732eb4-5af9-408b-959c-d63a7d4fb5d8)
What purpose do …
-
Hi all,
I recently got a BitAxe Ultra Miner (Version 201) - although I feel little cheated as seller did not mention it be a 201 version, does worry me that 201 versions may not be 100percent stab…
-
Enhancement request:
Would be helpful to be able to place a suggest difficulty field to the UI to help improve the submitting of shares right from the stratum handshake to help expedite the submitt…
-
The pins I thought were the on-die chip temp sensor don't seem to be working. the EMC2101 will read 127ºC, the max temp all the time.
It's probably best to DNP resistors R7 and R8 to disconnect the…
skot updated
10 months ago
-
After upgrade, fan speed always 0rpm. Even after Invert Fan Polarity and disable Automatic Fan Control.
Hardware BM1397 v2.2