-
### What happened?
I am currently trying to use my custom OS I used half a year ago already and boot up a new Raspberry Pi 4B Model V Rev 1.5. For some reason I end up in the initramfs. I tried ano…
-
When Raspberry pi Zero recieves power it takes some time before it starts recieving inputs from the keyboard it is connected to (Arround 30-40 seconds)
This process should be sped up.
Possible sol…
-
Hello everyone, great things happening around RancherOS. Nicely done.
I'm testing rancherOS version `0.6.1` in a `Raspberry Pi 3`. According to the [docs](http://docs.rancher.com/os/) the boot time …
-
**Description**
I have terrible GUI performance on Raspberry Pi 4 and Raspberry Pi 5 with Wayland and Weston.
Everything lagging independently on screen resolution. I use screen connected by…
-
I had few problems with my HyperPixel 4 Square on my raspberry pi zero 2 W so here is the instructions to get it works :
- You will need to solder a header to plug it in to the screen
- Install …
-
| Answer some general questions first | |
|:------------------------------------------------------------------- |:------:|
| Which firmware version are you usin…
-
**Possible/probable practical problems with the current Pi 5 image**
While preparing initial and experimental support for the Raspberry Pi 5, a number of possible problems were listed in [TODO.md](…
-
**elemental-toolkit version:**
elemental-operator-1.5.3 (via Rancher UI Extension)
**CPU architecture, OS, and Version:**
Raspberry Pi 4B - 8GB
**Describe the bug**
When "repurposing" an E…
-
### Describe the bug
RBD module is not available in compiled Raspberry linux kernel images but is needed for CEPH
in #2916 CEPH module was added - additionally RBD would also be very useful to use…
-
### Describe the bug
The U-Boot bootloader NixOS ships with on aarch64 SD card images limits kernel size to 71827456 bytes (68.5 MiB) as per [this patch](https://github.com/NixOS/nixpkgs/blob/master/…