-
i have test this library with sim5320
network connection is works, but mqtt aio is not work
Attempting to open comm with ATs
---> AT
ATE0
ATE0
AT+CVHU=0
ATI
AT+CPMS="SM","SM","SM…
-
I have attached the code here. I am using ESP32 with Botletics sim7000 sheild and got this sketch from ESP32_LTE_Demo example.
Http get works seemlessly buy when I use only http post method it seems…
-
Hello, I just got in the mail 2 lilygo T-SIM7000G boards that I'm trying to connect to the AT&T cat M network.. I'm using the Arduino_NetworkTest sketch and Neither will connect with changing the AP…
ghost updated
2 years ago
-
Hi,
I'm using SIM7000C and successfully run HTTP request on NB-IoT now I'm trying to connect with MQTT broker.
I have 2 MQTT Brokers one is IBM Watson IoT Platform and second one is CloudMQTT.
In…
-
I have 3 sim7000g modems that all show the exact same IMEI when calling for it in the firmware. The physical modem sticker is unique on each modem but firmware all show the same IMEI. I have not yet a…
-
I use the DFRobot_SIM7000_UDP sample code, and I meet a big problem that fail to attach service.
I try a lot of function to connect the APN using AT+CSTT, AT+CIICR, AT+CIFSR those AT command, but i s…
-
[Figured it out]
[Sort of. I still don't have HTTPS working right.]
I have not been able to get HTTPS to work. Here is what I've done so far:
1) Install the Windows 8 Drivers from the botle…
-
Hi!
I would like to ask for help about my project. I am making a flood monitoring system with sms notification usinh arduino uno r3, gsm 900a module and water level sensor. Below is the wiring of my …
-
Hi,
I have a Waveshare SIM7000G module connected via USB to a Raspberry Pi.
I frequently send AT commands for HTTP Posts to the modem on /dev/ttyUSB2.
That works fine for a while until the mode…
-
After enabling Sleep Mode, it seems like the function getNetworkStatus does not return a valid value.
However, running the command by itself does work.
---> AT+CGREG?