-
### Reproduction steps
LwIP offers two modes to run TCP/IP stack: a dedicated task or in-line.
In the former case, access to LwIP's state is serialized by requiring that all APIs be invoked from the…
-
usb cdc example freeze after request device descriptor
-
For Windows there is BLFlashCube and for Linux, there's a binary of flash_build, but not really the source. This is problematic for developers on MacOS (with two processor types), Raspberry Pi, or dev…
-
WiFi eats a lot of flash and nearly all of the RAM. The resulting flash is unreliable and flashing hangs at flash erase. But more importantly there's not enough ram left for a useful application.
`…
-
### Reproduction steps
I tried following the build guide as mentioned here: https://github.com/project-chip/connectedhomeip/blob/master/docs/guides/BUILDING.md
1. git clone --recurse-submodules gi…
-
Hello!
I have a Pine64's Ox64 board (with 2MB flash) and I don't run helloworld app.
I have:
- bl_mcu_sdk master branch
- riscv64-unknown-elf-gcc (Xuantie-900 elf newlib gcc Toolchain V2.6.1 B-…
-
Flashing with DevCube v1.8.4 results in a working M0 but a completely dead D0 when following the instructions in the readme.
Verified by two Discord members, who failed to get D0 to boot when using…
-
### Reproduction steps
```console
~/code/connectedhomeip0 source ./scripts/bootstrap.sh …
-
I would like to know if BT and WiFi drivers are working in linux version?
-
Hi,
My goal here is to use edge impulse FOMO and get the count of objects on Wio Terminal. In order to do that, I was following this [link ](https://docs.edgeimpulse.com/docs/development-platforms/of…