-
Hello, I'm building this project with these libraries for `heltec_wireless_stick` board.
Dependency Graph
- `|-- 2.33.2`
- `| |-- 2.0.0`
- `| |-- 2.0.0`
- `|-- 1.1.0`
- `|-- 4.0.0`
-…
-
It appears that the Apollo3 Arduino core doesn't implement these Arduino functions:
* `noInterrupts()`: https://www.arduino.cc/reference/en/language/functions/interrupts/nointerrupts/
* `interrupt…
-
Previously, I was able to transmit data to the helium network. I am still using the same device but it has been off for months. Now, I am unable to receive data because the device keeps trying to join…
-
When I select USB or USB+Hardware Serial for the serial interface and I power the board externally via Vbus pin, some Catena4612 boards won't run the sketch until I connect USB cable to a computer.
…
-
Previously, I was able to transmit data to the helium network. Now, I am unable to receive data but the device keeps trying to join. I also tried to add a new device but it also got stuck at the joini…
-
The board came with firmware preinstalled. I compiled and flashed my customized version. Now the board hangs in a loop. I think this is a display problem. I'm using the latest version from github. Can…
-
Using TTN V2 , usually, I use the flags combination LMIC.txrxFlags & TXRX_ACK inside the function Arduino_LoRaWAN::ReceivePortBufferCbFn receiveMessage. If that combination is true then I can tell tha…
-
The README.md need to be updated to conform to the documentation ukaze.
Every sketch needs a README.md explaining (at a minimum):
* what the sketch is intended to do, and when to use it
* which…
-
I use lmic_project_config.h mentioned below together with an adafruit lora feather M0 900Mhz, but it still transmits +900 MHz and not in the 868 band as required.
```
// project-specific definition…
-
With the latest version of library, SAMD boards get build issues. Please find the error logs below.
```
In file included from C:\Users\dhineshkumar\Documents\Arduino\libraries\Catena-Arduino-Platf…