-
```
组件接口需设计
```
Original issue reported on code.google.com by `qy.n...@gmail.com` on 31 Mar 2013 at 8:30
-
Any chance that you can post binary hex file(s) that are ready to be flashed by non-developers too?
Zigbee router firmware hex for Sonoff BASICZBR3 (a.k.a. Sonoff BASIC ZBR3 / Sonoff BASIC ZB R3)?
…
-
~/tmp/contiki-cc2530eb/examples/cc2530eb/udp-ipv6(master*) » make …
-
```
您好,
感谢西北工业大学无线传感网的相关工作人员,同时也感谢您们的开源精神!
请问如下几个在CC2420下使用的components,在移植后CC2530文件中那些函数与之相对应?
components CC2420PacketC
command uint8_t getLqi(message_t *p_msg)
command uint8_t getPower(m…
-
Please consider adding option to flash CC2531 and CC2530 SOC with zigpy-znp if already been flashed with serial bootloader.
puddly has added instructions to zigpy-znp README.md with information on …
Hedda updated
2 years ago
-
Does anyone meet the stability problem in Zigbee2MQTT? I flash the firmware to CC2530(E18-MS1-PA1), and it seems that very unstable.
(1) I use coordinator cc2652p, and very close to the 20 keys fr…
-
This idea came from developer discussion between zigpy-znp developers in https://github.com/zha-ng/zigpy-znp/issues/10
Would it be possible to script a "backup and restore" migration feature/functi…
Hedda updated
3 years ago
-
```
您好,
感谢西北工业大学无线传感网的相关工作人员,同时也感谢您们的开源精神!
请问如下几个在CC2420下使用的components,在移植后CC2530文件中那些函数与之相对应?
components CC2420PacketC
command uint8_t getLqi(message_t *p_msg)
command uint8_t getPower(m…
-
I may need some help fleshing this request out.
The TICC253X is an 8051 SOC. that with the zstack will support Zigbee, with some higher-level commands to create coordinators, routers, and end devic…
-
What do you think about also providing a pre-configured Zigbee router firmware image for the IKEA Trådfri ICC-A-1 Module?
Checkout Ikea Tradfri Zigbee Repeater Umbau project with Zigbee router fir…
Hedda updated
3 years ago