-
On a large network after an short to medium amount of time the USB stick appears to crash. With two sticks running alongside each other, the network with 50 devices will crash, the stick with 2 device…
pwood updated
2 months ago
-
Suggest to move CC2530 and CC2531 compatibility listing in both zigpy-znp README.md and Home Assistant's ZHA integration to a "Legacy support" subsection catagory under compatible hardware and comment…
Hedda updated
2 years ago
-
- Coordinator : LAUNCHXL-CC26xR1, FW CC2652R_coordinator_20210120.zip, IEEE: 00:12:4b:00:21:9f:c1:f9, NWK: 0
- End device : Danfoss Ally, IEEE 84:2e:14:ff:fe:5e:50:10, NWK: 0x020C
I'm investigatin…
-
### Description of the issue
After some time of intermittent issues (addon working for few hours, then stopping), the issue intensified up to complete inability to start the addon. No useful log ap…
-
### What happened?
I'm in a phase of migrating my adaptor from CC2530 to Sonoff Dongle.
I succeed to flash thank to ZigStarZW, I also write the CC2530 IEEE into the Sonoff stick
```
➜ / ls -l …
-
Zigbee is becoming the de facto standard in home automation. It would be great if `OpenMQTTGateway` could support this protocol. Below I have a write up about the most promising solution at the moment…
-
Hey,
In networks where there is more traffic bringing possibilities of higher interface throughput could help with stability.
CC2652R supports up to 3Mbps (https://www.ti.com/lit/ds/symlink/cc26…
m4tek updated
2 months ago
-
The ZZH cc2652r stick would be a better format for pentesting in the field. Would you be willing to support that in the future with a release image?
[zzh stick on tindie](https://www.tindie.com/pro…
-
Hello,
I had a question within another forum.
You can find the whole conversation at the link below.
https://github.com/Koenkk/zigbee2mqtt/discussions/13680#discussioncomment-3484551
or th…
-
node-red-contrib-zigbee
0.20.3
Update auf 0.21.0 geht nicht
CCU3