-
Occasionally, I get failures to connect to the target. GDB reports as follows (below), and hangs there.
I'm not able to reproduce this behavior reliably - it seems pretty random. What can I do to …
-
As the title says, it seems like my WCH-LinkE is not recognized by openocd.
openocd output:
```
Open On-Chip Debugger 0.11.0+dev-02415-gfad123a16-dirty (2023-02-22-15:09)
Licensed under GNU GPL v2…
-
Have code i2c, oled, adc, flash memory ?
thankyou
-
It should be documented what exact MCUs / eval / dev boards we support and what configuration options the framework each have.
Also how to get started with eval boards. Not setting the BOOT0/1 jump…
-
Hi,
I'm trying to implement wchnet library in Arduino framework on platformIO, but I run into a problems.
So, I succeed to add wchnet as library in platformIO, and it compile without problem, but it…
-
Thank you for providing this Rust PAC for CH32V series MPUs. I am happy to writing program by using this crate.
But I found a code defining USB type-c controle register
```
///0x38 - USB type-C…
nosuz updated
11 months ago
-
It is not a direct bug in this demo, but the behavior is a little concerning, so I thought I would report it.
Environment:
Windows 10, WCH-LINK, CH32V203 evaluation board (I don't know the name. P…
-
A simple
```yaml
steps:
- uses: actions/checkout@v3
```
Is taking **44 seconds** on Windows Server 2022 (`windows-latest`), while it takes **1 second** on Linux (`ubuntu-latest`). Tha…
-
Hi,
I've uploaded the picorvd.uf2 file to the Pico, and wish to transfer an .elf file that was built with Mounriver Studio, it is an elf file that is known working.
Here is what I'm typing at the …
-
As the title says, no support for analogWrite();
What needs to be done in order for it to work?
Has anyone figured it out?