-
Testing a 1.5MByte file
```
dd if=/dev/zero of=test.bin bs=1500000 count=1
```
and using the Picoprobe setup (two Picos, one flashed with https://github.com/raspberrypi/picoprobe, latest 1.0.3 f…
-
I can't seem to load the basic Blinky example via the board's DAPlink. I can upload to the Pico directly just fine but not with the baseboard. This is the error i get:
```
EXT: hex
Open On-Chip D…
-
### Hardware
Arduino Nano Matter
### Core version
2.0.0
### Arduino IDE version
2.3.2
### Operating system
Debian 12 Gnome
### Radio stack variant
No radio
### OpenThread…
-
Hi All,
The problem I'm having getting picoprobe debug started relates to the title of this issue ticket.
I'm using the Arduino-ide v-2.2.1 along with a Raspberry Pi pico setup as an swd for a Ras…
-
Hello,
Has any work been done to support newer IDF versions?
I'd like to port this project to ESP32C6 to use this tiny module: https://docs.m5stack.com/en/core/M5NanoC6
However, it requires IDF 5.…
-
```
drasko@Lenin:~/rtl8710/open-ameba$ make flashburn
make[1]: Entering directory '/home/drasko/rtl8710/open-ameba'
Open On-Chip Debugger 0.10.0+dev-00143-gf6449a7c (2017-05-13-23:22)
Licensed und…
-
I cannot get openocd to see the picoprobe, but it appears to be there. HOPEFULLY this is enough information for others to chime in:
```
dx@pop-os:~/pico/picoprobe/build$ git status
HEAD detached at…
dx9s updated
10 months ago
-
Type: Bug Report
**Describe the bug**
- VS Code Version: 1.77.3 (user setup)
Electron: 19.1.11
Chromium: 102.0.5005.196
Node.js: 16.14.2
V8: 10.2.154.26-electron.0
OS: Win11, Window…
-
I've been experiencing an issue where poor power rails cause the bootloader to be entered spontaneously. You can simulate this by applying power to a Feather M0 by holding the ends of two wires togeth…
-
Hi,
I use two RP2350s to test downloading and debugging. One of them is used as a debugger. And the following pins are connected.
```
Pico A GND -> Pico B GND
Pico A GP2 -> Pico B SWCLK
Pico A…