-
I want to control one pixel led by controlling arduino . but i only can cntrol all pixel leds .
The procedure for controlling all lights is as follows. I'm not sure this is incorrect because I alwa…
-
Leds on the transmitter and dimmer control should indicate level of the channel like the leds on rx
-
-
-
This would allow users to identify which Romi they are connected with.
-
First of all, I wanted to thank you for sharing your work - it is really amazing!
Thanks to your project I was able to get the NAS fan management OOTB working., even the network LEDs and the general …
-
Installed and runs without errors, but the RGB leds do not change at all. I'm running Debian.
I don't know what other info i should provide, but i'm happy to share the output of any command you nee…
pnjun updated
4 years ago
-
I would like you to add support for WS2815.
Using WS2813 (closest relative I found) is that sometimes the LEDs show too bright colours. This happens because the timing of a "0" is much shorter for th…
-
From https://forums.raspberrypi.com/viewtopic.php?t=329394
> My team has built a custom hat which we use for controlling LEDs and Fans. This hat uses hardware PWM for controlling the fans. We've j…
-
Hi guys!
Currently I'm very excited about the upcoming support for fadecandy. This seems to be a good solution for controlling a lot of WS2811/12B leds.
Recently a guy named Jeremy Graff wrote a lib …