-
**_Reported by Benjamin Walsh:_**
As an ARM kernel developer, I would like to be able to quickly test/sanitize my Cortex-M0/M0+ code.
AFAIK, there is no QEMU Cortex-M0/M0+ model. However, Cortex-M…
-
### Problem
I need to have different runners based on release/debug build
for now `[target.'cfg(debug_assertions)'.runner]` is always active even if `--print=cfg` shows no `debug_assertions`. I'm aw…
-
It is necessary to integrate the HLK transceiver in the bootloader for Cortex M3.
-
Hi!
Is it possible to extend OTA support for Atmel SAM3X8E ARM Cortex-M3 ?
The architecture is quite similar with already supported platforms and from the first look, it should be possible to do, bu…
-
This repo adds support for the GD32 series
* GD32E23x (Cortex-M23) via `gd32e23x.cfg`
* GD32VF103 (RISC-V) via `gd32vf103.cfg`
however, there is no dedicdated support for all the other GD32 ARM c…
-
To develop HTTPS as a protocol for connection to the server and downloading files
-
The bootloader is not working with the transceiver BG96. Understand the problem & fix it
-
The actual GPRS engine is only working with M95. To integrate the last version developed in the M2M project that is able to work with M95 and BG96 transceivers
-
The latest recoverd sonde (from the german Bundeswehr) contains the STM32L412KB chip and is a device with Ultra-low-power with FPU Arm Cortex-M4 MCU 80 MHz with 128 Kbytes of Flash memory. Looks the s…
-
Can you please share your cfg file for openocd. I used stm32f1x.cfg on GD32F103C8 but unsuccess.
Also, gd32f103.dap 0x4 0x00 can the command be replaced with stm32f1x.dap 0x4 0x0?