-
Tried running Examples/lan-csma.py on nessi; getting error
struct.error: 'i' format requires -2147483648
ghost updated
8 years ago
-
Hello, I have checked your wmediumd.c file and found the CSMA code, but I did not find the polling code, I wonder if there is any?Thank you very much!
-
Task is to port Samraksh.NET (radio, csma, rf231 driver, etc) to ADAPT platform (debug board). Interface is via .NOW shim-board.
-
There are numerous messages throughout our code that need to be standardized.
As an example the CSMA code has this:
"CSMA Send Error: Packet is too big"
This message goes out the COM port to the use…
-
When I run ./waf --run mec-sim_scenario1.cc ...Resolve after copying the data to /scratch
Now i get the error message below...how can i fix it ?
Waf: Entering directory `/home/ee/repos/tarballs/…
-
It seems that it is possible to have a mesh network within very restricted MCU requirements (and over protocols which are not inherently supporting mesh).
With some effort, it seems like that we'll …
-
Hello, I have checked your wmediumd.c file and found the CSMA code, but I did not find the polling code, I wonder if there is any?Thank you very much!
-
Guys
I'm a little bit stuck with zigate v2, v3.21 network and MAC_ENUM_CHANNEL_ACCESS_FAILURE error.
There are attribute reportings from the device then MAC_ENUM_CHANNEL_ACCESS_FAILURE errors.
…
-
I have tried compiling the development version on my RPI3 with a RFM69HW radio same as the node (pro mini 3.3v) but I am getting -90dbm RSSI on node with 100% tx power and a bunch of NACKs, while just…
-
```
i cannon access to server from total commander and web browser.
error: 550 Invalid name or chroot violation
log from total commander:
""
Connect to: (2012-02-08 12:30:29)
hostname=192.168.0.130:…