-
Hi!
Great work, big thanks!
Would it be possible to implement a THD measurement (audio amplifiers, etc.)?
zen67 updated
3 years ago
-
Hi fredilarsen,
thanks for that great project. I already tried it using my EU Model 3 and it works perfectly!
One other question:
Could you maybe add the code you used for sniffing the rf signal…
-
Hello,
First, thanks for making this API available. It helped a lot.
I have an old DVB-T dongle derived from the FX2LP connected to an i2c device.
To know what address it is using, I'm using the fo…
-
I successfully built this adapter and it tested out fine in a Commodore B128-80 lo-profile model using Commodores own dealer diagnostics cartridge and loopback connectors. I used OSHPark.com for my …
-
Hi guys.
Recently I got my hands on a clone of USBee-DX device. This is combined logic analyzer and oscilloscope.
I was hoping to make it working under Linux with Sigrok PulseView software, but un…
-
Hi,
After a few flashes, I can't revert the EEPROM to factory firmware anymore.
**I don't have a Glasgow** yet so I am using a FX2LP dev board ([EZ-USB FX2LP CY7C68013A](https://www.hotmcu.com/e…
-
Hello.
I have a USB oscilloscope INSTRUSTAR-205A (http://english.instrustar.com/).
Is it possible to work OpenHantek with him in theory?
What will it take to finalize? The name of the USB chip, AD…
-
I was able to build your firmware, but I am not really familiar with CY7C68013A, can you describe how can I upload the firmware on the CY7C68013 chip?
-
I just built `firmware.bin` on 8ae10d25574f583828203a85be58edfd92cbc8c7 and found that it contains over 10 kBytes of text:
```
firmware$ size glasgow.ihex
text data bss dec hex f…
-
Hi there,
are there any approaches in supporting the 6004BD series, especially the Hantek 6204BD in linux?
I just found that the serial communication chip is a CY7C68013A (FX2LP) and that it can…