-
I was reading https://forum.swissmicros.com/viewtopic.php?f=17&t=2820 and tried the cube root of -8 on a DM32, DM42, C47 and then I tried it on the DB48X (on a DM32)
All of them give either -2 or an …
yeled updated
9 months ago
-
### Discussed in https://github.com/c3d/DB48X-on-DM42/discussions/262
Originally posted by **camillew** July 31, 2023
Hello,
I started testing the new release 4.0, and there seems to be a …
c3d updated
10 months ago
-
Reported by Jeff (@spiff72)
> I've been mainly just doing basic calculations (mult, division, etc).
>
> I just find that simple math division operations with decimals have a bit of
> lag (both the en…
c3d updated
11 months ago
-
The unit menus currently have fixed names, so it is difficult to have for example a `Money` units menu, or to reorganize menus according to taste.
It would be better if the menus were built dynamical…
c3d updated
11 months ago
-
After a day of using 0.4.8 firmware:
[https://youtube.com/shorts/UOwYYszr4yU?si=w-_QFNlmRmH6zmhc](url)
After stopping using the calculator and powering off **for several minutes** and try to tur…
-
Unclear if intentional or not, but by default as of 1.0.11, the top (blank) row of buttons in Plus42 now do the same as the buttons in the row "Σ+" through "XEQ", which is surprising, unexpected (and …
-
`13.72 / 25.4` should display as `0.5402`, but currently displays as `5.4016e-1`.
Reported by Ben Hagler
c3d updated
11 months ago
-
I have done some experimenting with UNITS conversions, and I am getting some odd results. I loaded a clean state after loading v0.4.11...
Within the length section, the conversions seem to work OK…
-
There have been reports of key feedback not working in the Android app store.
I strongly suspect that the users don't have touch sounds and/or touch vibrations enabled on their device. If haptic f…
-
This happens because NEG(x) is implemented as "0 - x", and the complex implementation of sums and differences forces a conversion to rectangular.
Maybe NEG(x) could be updated to "-1 * x", so that…