-
**Describe the feature you'd like**
Support mipsle bases routers, such as the ever lasting edgerouter x.
**Describe alternatives you've considered**
Setting up a cross compile env on a linux vm o…
-
### Describe the bug
My EdgeRouter-X freshly updated to 23.05.0-rc3 (from 22.03.5 stable) floods unicast frames destined for the router itself out on all ports belonging to the same VLAN, resulting…
-
I have a VPN set up Site A is master, B and C are peers A can see B and C, B and C can see A. but B and C clients can't see each other. (peers cannot see each other) however B can ping C and C can pin…
-
Status of Linux kernel 6.1 migration in master:
- [x] airoha
- [x] apm821xx
- [x] archs38
- [x] armsr
- [x] at91
- testing: https://github.com/openwrt/openwrt/pull/15196
- [x] ath25
…
hauke updated
2 months ago
-
Please reopen Lochnair/vyatta-wireguard#98 on this repo. The issues still exists and is reproducible by my three ERX routers.
Edit: adding info from old issue
If you use a Mediatek device with hwn…
-
Hi,
Reference to my previous issue, a new hotfix broke the installation. As suggested by you, I run the commands to check if the package still exists, attached are before and after the upgrade. Any h…
-
My use case: Tunnel all traffic from my home router to a wireguard endpoint that accepts 0.0.0.0/0. For example, connecting to a Mullvad wireguard endpoint.
What I've done: I don't want any traffic…
-
The edgerouter's kernel partition of 3MiB is getting to small for upcoming lts kernel 6.6.
Depending on how the following OpenWrt issue is resolved, we will likely need new factory images for the web…
Djfe updated
4 months ago
-
### Package version
1.0.22020627
### Firmware version
2.0.9-hotfix6
### Device
EdgeRouter 4 / 6P / 12 - e300
### Issue description
Wireguard interface appears in "show interfaces". Attempting …
-
The network freezed silently on a [Ubiquiti Edgerouter 4](https://openwrt.org/toh/ubiquiti/edgerouter_4#ubiquiti_edgerouter_4) with OpenWrt:
```
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='21.02-SNAPSHOT…