-
Hi there :)
Would it be possible to get a list of supported EEPROMs for replacing unflashable ROMs/chips ?
I gather from the issues and release notes that right now, at least the following are s…
-
Does not compile on Raspian Bullseye, Kernel version 6.1.21-v7+
Error is as follows:
will@homestats:~/eeprom-ST25DV-linux-driver/src $ make all
make -C /lib/modules/6.1.21-v7+/build M=/home/w…
-
How do you fix a corrupt eeprom? Had a tough time flashing a bbb16v2 smd now it says it's corrupt.
Any help would be appreciated.
-
Parameters are not surviving reboot/reset. See serial monitor below ....
-------
* Executing task: ~\.platformio\penv\Scripts\platformio.exe device monitor --environment esp32-s3-devkitc-1 --por…
-
Although the primary page on arduino.cc doesn't mention an EEPROM.lenght() this page suggests that it may exist and that its there to report the length of EEPROM for devices that have larger EEPROMs.
…
-
I'm missing an EEPROM emulation like on STM32duino
-
Hi Andrew
Thanks for writing pi-eeprom-programmer, it sounds like it should be very useful, if I understood how to wire it up!
There are two problems with the README, the first is minor and easi…
-
Sometimes after printing or after print cancel I'm getting "EEPROM datasize error" in Octoprint logs. The bed level is resetting and it's required to perform bed calibration again. It's quite annoying…
-
Hi, how did you copy and write the eeprom?
-
Hi there, thanks for all the great work!
I can't seem to find any information about reading and writing from / to EEPROM. Is this something that is on the roadmap, or am I looking in the wrong pla…