-
Hi Dylan,
thanks for your example, is very interesting.
I'm trying to understand how I could use WaveShare EPaper Display with Adafruit HUZZAH32 ESP32 Feather Board.
I tried to make a simplif…
-
Hi.
I was just curious, how did you know which LA pinouts went to MOSI, CS, etc?
-
**Describe the problem you have/What new integration you would like**
I cannot use a specific Waveshare model, and I do not know how to get it added to the ESPhome code:
[current](https://esphome.io…
-
**Hardware**
- Pi Zero 2 W
- Waveshare 2.13inch e-Paper HAT v4
**Describe the bug**
Device Busy
- I have tested the screen on a pi4b and the image draws.
- [Not Tested] I have heard that it ha…
-
Hallo,
erstmal vielen Dank für deine Software und deine Anleitung im loxwiki.eu
Ich habe 2 Probleme mit einem Waveshare 1.54" Display an einem NodeMCU.
1: Sobald ich die Leitung RST auf D4 an…
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x] Searched the problem i…
-
### The problem
I have one of the newer 2.9 inch V2 e-ink devices (v2 sticker with rev2.1) and I'm trying to make it work with ESPHome.
Partial update works fine (with slight haze, as to be expect…
-
**Waveshare 13,3" error at new cycle**
The epd displays the modules at the first start, but it doesn't refresh, and when starts a new cycle it stops with error.
(venv) inky@inkycal:~/Inkycal …
-
I'm using the 7.5inch display, https://www.waveshare.com/wiki/7.5inch_HD_e-Paper_HAT. I've browsed through similar issues (e.g. https://github.com/GregDMeyer/IT8951/issues/18) and tried the following:…
-
### The problem
Hi,
I am unsure if this is the expected behavior.
I am using a wave share 7.5 v2 display directly connected to an ESP32 from Waveshare.
It works fine so far, but every time it refr…