-
You get great battery life from a single charge. I am also working on a similar device and I have my own implementation ideas for this. I looked through your code and didn't see a command to put the e…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Describe your problem
i think its because of atmega32u4
### Steps to reproduce
my wiring its ok but it doesn…
-
First of all, I would like to say THANK YOU for your work!
Secondly, the question: it is possible to make a backup of the original firmware of Main module and Zigbee module?
Third: is it possible to…
-
Hi Folks,
I'm trying to get a H801 up and running with Homie. Using the follwing minimal firmware with current homie developer branch, Homie usually crashes once or twice within the first 20 second…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
Hi Pär,
Great work on the code! I've got many customers in Sweden for my [device](https://www.zuidwijk.com/product/slimmelezer-plus/) and some customers referred me to this code of yours.
My dev…
-
### Basic Infos
#### Hardware
**WiFimanager Branch/Release:**
- [ ] Master
- [x] Development
**Esp8266/Esp32:**
- [x ] ESP8266
- [ ] ESP32
**Hardware: ESP-12F,**
- [ ] ESP01
- [x ] E…
-
Hi guys,
i'm facing a very strange behavior.
I'm using a NodeMCU v2 instead of an ESP-01 and it is working quite fine with an Ardupilot at 115200.
The strange happens when i try to use it with a Pi…
-
I am currently building an FCC certified module with HopeRF and wanted to know if using the DIO0 pin for interrupt vs what you recommend matters or not. The lowerpowerlab version only uses that pin. W…
-
Hello, as the title says, I managed to brick a WB3S module. I wanted to erase it completely, selected the advanced options, and erased it all, including the RF section. I noticed that successive flash…