-
### The problem
To get the camera to work in this board you need:
https://github.com/Freenove/Freenove_ESP32_S3_WROOM_Board
![Freenove_ESP32_S3_WROOM](https://github.com/Freenove/Freenove_ESP…
-
ESP32 LVGL WIFI&Bluetooth display board 2.8" 240*320 2.8inch TFT LCD with touch WROOM white screen error
![IMG_4652](https://github.com/justcallmekoko/ESP32Marauder/assets/126687034/db913e64-9b00-4…
-
I want to transplant the project to the ESP32-WROOM-32 chip. What parts need to be modified to modify the source code?
Best regards.
-
Currently you cannot easily use any WROOM-2 based ESP32 Boards.
As far as I can tell, this is related to the flash mode used for all WR2-ESPs
Which seems to require OPI for both of PSRAM and FLASH
…
-
I would like to ask you, if possible.
I have a **LILYGO T7-S3** what is an _ESP32-S3-WROOM-1-N16R8_ =16M Flash a and 8MB PRAM. I would like to use this processor and I do not have enough experience t…
-
When I tried to compile according to the tutorial, the compiler prompted that STATIC was unknown. After trying to change it to lowercase, although there were warnings, it was able to be edited, but ul…
-
### Port, board and/or hardware
esp32-WROOM
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; Generic ESP32 module with ESP32
### Reproduction
in micropython
```
int.from_bytes(b'\xFF\…
-
As discussed in the forum post [ESP-32 WROOM discrepancy in quickref page](https://forum.micropython.org/viewtopic.php?f=18&t=10076), the [ESP32 quickref documentation](https://docs.micropython.org/en…
-
Sir is this only for the 32D version? I tried to build the code using esp idf 5.1 then flashed. Its causing bootloop (resetting/rebooting).
![image](https://github.com/johndeweyzxc/AWPS-Launcher/as…
-
While I see there is some support for the 16mb versions of this board, not seeing anything current for the 32mb version of it. I am using it on a couple of different builds, and I am running out of me…