-
uuPyLoader (0.1.3) fails to connect to boards with an ESP32-S2, in my case:
- LilyGO TTGO T8 ESP32-S2
- Wemos S2 mini ESP32-S2
No problems with loading firmware (with esptool.py).
The first boar…
-
Hi @tgsong,
We have been using this project successfully (big thank you!) to build our application for the ESP32 with AFR. We are now looking at using the ESP32S2. There is a newer branch of amazon…
-
# Intro
This is a followup on https://github.com/jeanthom/openocd-dirtyjtag/issues/2#issuecomment-769485719, focusing a working setup with DirtyJTAG+[Espressif ESP32S2 Saola-1 dev board](https://do…
-
stooged please help. It is impossible to install everything that is needed for Arduino. I think it says I am missing esptool.py?
Arduino: 1.8.19 (Windows 10), Board: "ESP32S2 Dev Module, Disabled, Di…
-
I'm having a bit of trouble trying to setup directional buttons as a dpad. Using the buttons as X and Y axis works, especially for diagonals, but using them as hat is a bit hard considering I have to …
-
Arduino IDE 2.3.2, Libraries: AsyncTCP (by dvarrel) v1.1.1, ESP Async Webserver (by Me-No-Dev) v1.2.4, ESP32S2 in FDU mode, Additional boards manager URL: https://raw.githubusercontent.com/espressif/a…
-
When using espflash 3.1.1 on the P4 dev board, it fails to detect the chip:
```
$ espflash board-info
[2024-09-12T15:32:39Z INFO ] Serial port: '/dev/ttyUSB0'
[2024-09-12T15:32:39Z INFO ] Connec…
-
esp-mdf WiFi mesh 组网发现，连接路由器组网连接成功后，直接断掉所连接路由器电源，会大概率出现cache error错误无限重启，小概率出现无法重连到路由器但是mesh组网正常，就是一直连接不上路由器，经测试路由器必须断掉电源bug才会复现，重启和其他操作不会复现bug，附件图片和文档为MDF与IDF版本与出现错误的串口信息
-
Hello, i'm kinda new to arduino and such …
nork1 updated
2 years ago
-
I flashed the firmware onto my ESP 32s2. I am using the official Wi-Fi development board for the flipper zero. But whenever I open the gravity app on the flipper it gives me a invalid bootloader error…
os196 updated
9 months ago