-
Has anyone been able to flash a generic esp8266 and get the device to run as expected? I have loaded a couple of the devices I had laying with the existing firmware, v12, and the flasher which is suc…
-
I've been using the esp8266 universal driver, official web firmware, with a 1.54V2 screen, current switch set to position A as instructed.
after about a year of full-refreshes every few minutes (ca…
-
Hello. I've applied your 4.0.7 release to my Airgradient DIY PRO v4.2 board with all components.
When I using airgradient's software every sensor data was visible but 4.0.7 isn't.
Only what I did i…
-
Hello, i have esp12 and wemos programmed, but i get no access point.
Esp12 gives
14:48:07.860 -> load 0x4010f000, len 3584, room 16
14:48:07.860 -> tail 0
14:48:07.860 -> chksum 0xb0
14:48:07.86…
-
### Port, board and/or hardware
rp2040
### MicroPython version
mp 1.22.2
### Reproduction
There isn't a code sample, the feature is built-in in the firmware.
### Expected behaviour
…
-
I have this deployed on an esp32. I have uart debug on and as long as the display is connected I get spammed with this.... Which looks like valid traffic based on the protocol doc. However, when I pul…
-
I hate to be a bother being a novice following a YouTube video, but in the portion of "Programming the D1 mini" under 'Tools -> port -> list of COM'
I don't see ANY COMs before or even after connec…
-
### The problem
Running ESPHome 2024.9.2 in a docker. 9 devices connected. The ones based on ESP8266 stay online/mDNS keeps on working, the ESP32 all drop off after some amount of time. When I reboot…
-
### The problem
When trying to update some devices, the output looks like this:
```
INFO ESPHome 2024.10.0
INFO Reading configuration /config/esphome/wyzeplug1.yaml...
INFO Generating C++ sourc…
-
I repeat the title question: Is it possible to use esp8266?
In order to insert the firmware into the wifi antenna supplied to the inverter.