-
I'm an ESPHome noob but I've recently been working with ESP32 devices.
I have been using some bare ESP32 devices and some Everything Presence Lite ESP32 devices.
**On the bare ESP32 devices,** I…
-
### The problem
I have several beca thermostats converted to ESP home:
https://devices.esphome.io/devices/Beca-Thermostat
with wb3s and cb3s boards. thermostats are hungs aproximatly in 12-48 hours…
-
If a scanner no longer acts as a scanner, it still shows in the config flow diagnostics, with requisite skullybones.
Waiting for confirmation if this happens with both esphome and shelly.
Raised v…
-
As a noob in esphome it took me an hour or so to figure things out.
To make things easier for people like me, I propose adding a quickstart section with a content like:
setup:
1) clone repo
2) c…
-
Hopefully this will help someone and wil be left here, I appreciate it is not 100% ATC FW related but if you did what I did and tried literally hundreds of FW flashes, downgarding to original Xiaomi M…
-
### The problem
To whom may concern.
I used to run HA on Tp-link Wifi extender via Lan Cable, recently I have changed it to the Normal Router again via Lan cable. almost most runs good except ESPH…
-
Hi and many thanks for the great component!
As soon as v4 was released, I migrated my configuration to it. Back then I noticed that no readings from sensors were ever received.
I rolled back to …
-
Hi,
Is there a schematic or any documentation to find the correct pinout for
- I2C
- ws2812 led
- the buttons
I2C seems to be default, but that depends on the lib you use, I tried GPIO8 (SDA),…
-
**Describe the problem you have/What new integration you would like**
When using the ESPHome integration with Home Assistant in a Docker setup, the “update” entity is missing. This makes it dif…
-
### The problem
Hello esphome community!
I have to warn first that maybe this problem is not related directly with esphome.
I have like 15 esphome devices added to esphome addon in Home Assistant…