-
Hello @iphong.
I was checking your repo and it is one the most similar ones that achieves what I want. So, I thought maybe you can guide me towards the solution I am looking for.
I am looking so…
-
### What happened?
Hello guys. I have the following question: I use wLED moonmodul. In particular because of the sound sync function. I use an ESP32 with inmp441 as the transmitter and an esp8266 as …
-
Need ESP32, why?
-
In your decribetion of code :
WIFI
3. Allow sending a broadcast ESP-NOW packet, but make sure that the packet is unencrypted;
But in your reference V2.1.0 :
3.8 part for ESPNOW still "ESP-NOW d…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I believe the logic expects that `esp_now_send` will always call `tx_cb`, but I'm not sure that will happen in all error cases. That means `readyToSend` can stay false and block any more sends from ha…
-
can you use wifi sta mode and ap mode to receive espnow at the same time ? .
Wifi STA to publish data to mqtt and AP to receive data from espnow ?
-
hi, im using dmd32 lib with esp now ,, but simple program rebooting again and again,
`…
-
hello,
I am using esp-idf 5.2.1 . I was able to compile cleanly the u8g2 hal and u8g2 driver, There were no errors reported upon compilation.
However I am experiencing frequent resets, about 5 m…
-
I'm currently using an EVK. The device is in RTK Fix and has 14mm HPA, but it's not immediately clear to me how. It doesn't appear to be L-Band or Bluetooth. It must be IP via PointPerfect, but 14mm i…